# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
# Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)
################################################################################
# Bootloader configuration - config.txt
################################################################################

################################################################################
# Memory (System/GPU configuration )
################################################################################

# Default GPU memory split (do not change if you do not know what you are doing)
  gpu_mem=128

# Configure GPU memory based on SDRAM size - overrides above setting
  gpu_mem_256=112
  gpu_mem_512=160
  gpu_mem_1024=256

################################################################################
# For overclocking and various other settings, see:
# https://www.raspberrypi.org/documentation/configuration/config-txt.md
################################################################################
# Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking always.
force_turbo=0

# Make display smaller to stop text spilling off the screen
#
# Note that the overscan settings only affect the splash screen and not Kodi.
#
# If you experience overscan/underscan issues the best solution is to adjust
# your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a
# calibration menu in the Kodi GUI.
# disable_overscan=1

# Force HDMI even if unplugged or powered off
# hdmi_force_hotplug=1

# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1

################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################

# decode_MPG2=0x00000000
# decode_WVC1=0x00000000

################################################################################
# End of default configuration
################################################################################

################################################################################
# Include distribution specific config file if it exists.
################################################################################
[all]
include distroconfig.txt
