.. _scan_internals:

Developper documentation for Scan
+++++++++++++++++++++++++++++++++

Context
=======

This document is meant to act as reference material for developers working
on Theano's loop mechanism. This mechanism is called Scan and its internals
are highly complex, hence the need for a centralized repository of knowledge
regarding its inner workings.

The ``theano.scan()`` function is the public-facing interface for looping in
Theano. Under the hood, this function will perform some processing on its
inputs and instantiate the ``Scan`` op class which implements the looping
mechanism. It achieves this by compiling its own Theano function representing
the computation to be done at every iteration of the loop and calling it as
many times as necessary.

The correspondence between the parameters and behaviors of the function and the
op is not always simple since the former is meant for usability and the second
for performance. Since this document is intended to be used by developers
working inside Scan itself, it will mostly discuss things from the point of view
of the ``Scan`` op class. Nonetheless, it will attempt to link those elements to
their corresponding concepts in the scan function as often as is reasonably
practical.


Pre-requisites
==============

The following sections assumes the reader is familiar with the following :

1. Theano's :ref:`graph structure <extending_theano>` (Apply nodes, Variable nodes and Ops)

2. The interface and usage of Theano's :ref:`scan() <lib_scan>` function

Additionally, the :ref:`scan_internals_optimizations` section below assumes
knowledge of:

3. Theano's :ref:`graph optimizations <optimization>`


Relevant code files
===================

The implementation of Scan is spread over several files in
``theano/scan_module``.  The different files, and sections of the code they
deal with, are :

* ``scan.py`` implements the ``scan`` function. The ``scan`` function
  arranges the arguments of scan correctly, constructs the scan op and
  afterwards calls the constructed scan op on the arguments. This function
  takes care of figuring out missing inputs and shared variables.

* ``scan_op.py`` implements the ``Scan`` op class. The ``Scan`` respects
  the ``Op`` interface, and contains most of the logic of the scan operator.

* ``scan_utils.py`` contains several helpful functions used throughout out the
  other files that are specific of the scan operator.

* ``scan_views.py`` contains different views of the scan op that have
  simpler and easier signatures to be used in specific cases.

* ``scan_opt.py`` contains the list of all Theano graph optimizations for the
  scan operator.


Notation
========

Scan being a sizeable and complex module, it has its own naming convention for
functions and variables which this section will attempt to introduce.

A scan op contains a Theano function representing the computation
that is done in a single iteration of the loop represented by the scan op (in
other words, the computation given by the function provided as value to
``theano.scan``'s ``fn`` argument ). Whenever we discuss a scan op, the **outer
function** refers to the Theano function that *contains* the scan op whereas the
**inner function** refers to the Theano function that is *contained* inside the
scan op.

In the same spirit, the inputs and outputs of the *Apply node wrapping the scan
op* (or *scan node* for short) are referred to as **outer inputs** and **outer
outputs**, respectively, because these inputs and outputs are variables in the
outer function graph. The inputs and outputs of scan's inner function are
designated **inner inputs** and **inner outputs**, respectively.


Scan variables
==============

The following are the different types of variables that Scan has the capacity to
handle, along with their various caracteristics.

**Sequence** : A sequence is a Theano variable which Scan will iterate over and
give sub-elements to its inner function as input. A sequence has no associated
output. For a sequence variable ``X``, at timestep ``t``, the inner function will
receive as input the sequence element ``X[t]``. These variables are used through
the argument ``sequences`` of the ``theano.scan()`` function.

**Non-sequences** : A non-sequence is a Theano variable which Scan will provide
*as-is* to its inner function. Like a sequence, a non-sequence has no
associated output. For a non-sequence variable ``X``, at timestep ``t``, the inner
function will receive as input the variable ``X``. These variables are used through
the argument ``non_sequences`` of the ``theano.scan()`` function.

**Nitsot (no input tap, single output tap)** : A nitsot is an output variable of
the inner function that is not fed back as an input to the next iteration of the
inner function. Nitsots are typically encountered in situations where Scan is
used to perform a 'map' operation (every element in a tensor is independently
altered using a given operation to produce a new tensor) such as squaring every
number in a vector.

**Sitsot (single input tap, single output tap)** : A sitsot is an output
variable of the inner function that is fed back as an input to the next
iteration of the inner function. A typical setting where a sitsot might be
encountered is the case where Scan is used to compute the cumulative sum over
the elements of a vector and a sitsot output is employed to act as an
accumulator.

**Mitsot (multiple input taps, single output tap)** : A mitsot is an output
variable of the inner function that is fed back as an input to future iterations
of the inner function (either multiple future iterations or a single one that
isn't the immediate next one). For example, a mitsot might be used in the case
where Scan is used to compute the Fibonacci sequence, one term of the sequence
at every timestep, since every computed term needs to be reused to compute
the two next terms of the sequence.

**Mitmot (multiple input taps, multiple output taps)** : These outputs exist
but they cannot be directly created by the user. They can appear in a theano
graph as a result of taking the gradient of the output of a Scan with respect
to its inputs: This will result in the creation of a new scan node used to
compute the gradients of the first scan node. If the original Scan had sitsots
or mitsots variables, the new Scan will use mitmots to compute the gradients
through time for these variables.


To synthesize :

===========================================================  =====================================================  ==========================================================  ===========================================================  =========================================================  ======================================================
Type of scan variables                                       Corresponding outer input                              Corresponding inner input at timestep `t` (indexed from 0)  Corresponding inner output at timestep `t` (indexed from 0)  Corresponding outer output `t`                             Corresponding argument of the `theano.scan()` function
===========================================================  =====================================================  ==========================================================  ===========================================================  =========================================================  ======================================================
Sequence                                                     Sequence of elements X                                 Individual sequence element X[t]                            *No corresponding inner output*                              *No corresponding outer output*                            `sequences`
Non-Sequence                                                 Any variable X                                         Variable identical to X                                     *No corresponding inner output*                              *No corresponding outer output*                            `non_sequences`
Non-recurring output (nitsot)                                *No corresponding outer input*                         *No corresponding inner input*                              Output value at timestep `t`                                 Concatenation of the values of the output at all timestep  `outputs_info`
Singly-recurrent output (sitsot)                             Initial value (value at timestep `-1`)                 Output value at previous timestep (`t-1`)                   Output value at timestep `t`                                 Concatenation of the values of the output at all timestep  `outputs_info`
Multiply-recurrent output (mitsot)                           Initial values for the required timesteps where `t<0`  Output value at previous required timesteps                 Output value at timestep `t`                                 Concatenation of the values of the output at all timestep  `outputs_info`
Multiply-recurrent multiple outputs (mitmot)                 Initial values for the required timesteps where `t<0`  Output value at previous required timesteps                 Output values for current and multiple future timesteps      Concatenation of the values of the output at all timestep  *No corresponding argument*
===========================================================  =====================================================  ==========================================================  ===========================================================  =========================================================  ======================================================


.. _scan_internals_optimizations:

Optimizations
=============

remove_constants_and_unused_inputs_scan
---------------------------------------

This optimization serves two purposes, The first is to remove a scan op's
unused inputs. The second is to take a scan op's constant inputs and remove
them, instead injecting the constants directly into the graph or the scan
op's inner function. This will allow constant folding to happen inside the
inner function.


PushOutNonSeqScan
-----------------

This optimizations pushes, out of Scan's inner function and into the outer
function, computation that depends only on non-sequence inputs. Such
computation ends up being done every iteration on the same values so moving
it to the outer function to be executed only once, before the scan op,
reduces the amount of computation that needs to be performed.


PushOutSeqScan
--------------

This optimization resembles PushOutNonSeqScan but it tries to push, out of
the inner function, the computation that only relies on sequence and
non-sequence inputs. The idea behing this optimization is that, when it is
possible to do so, it is generally more computationally efficient to perform
a single operation on a large tensor rather then perform that same operation
many times on many smaller tensors. In many cases, this optimization can
increase memory usage but, in some specific cases, it can also decrease it.


PushOutScanOutput
-----------------

This optimizations attempts to push out some of the computation at the end
of the inner function to the outer function, to be executed after the scan
node. Like PushOutSeqScan, this optimization aims to replace many operations
on small tensors by few operations on large tensors. It can also lead to
increased memory usage.


PushOutDot1
-----------

This is another optimization that attempts to detect certain patterns of
computation in a scan op's inner function and move this computation to the
outer graph.


ScanInplaceOptimizer
--------------------

This optimization attempts to make Scan compute its recurrent outputs inplace
on the input tensors that contain their initial states. This optimization can
improve runtime performance as well as reduce memory usage.


ScanSaveMem
-----------

This optimizations attempts to determine if a scan node, during its execution,
for any of its outputs, can get away with allocating a memory buffer that is
large enough to contain some of the computed timesteps of that output but not
all of them.

By default, during the execution of a scan node, memory buffers will be
allocated to store the values computed for every output at every iteration.
However, in some cases, there are outputs for which there is only really a
need to store the most recent N values, not all of them.

For instance, if a scan node has a sitsot output (last computed value is
fed back as an input at the next iteration) and only the last timestep of
that output is ever used in the outer function, the ScanSaveMem optimization
could determine that there is no need to store all computed timesteps for
that sitsot output. Only the most recently computed timestep ever needs to
be kept in memory.


ScanMerge
---------

This optimization attempts to fuse distinct scan ops into a single scan op
that performs all the computation. The main advantage of merging scan ops
together comes from the possibility of both original ops having some
computation in common. In such a setting, this computation ends up being done
twice. The fused scan op, however, would only need to do it once and could
therefore be more computationally efficient. Also, since every scan node
involves a certain overhead, at runtime, reducing the number of scan nodes in
the graph can improve performance.


scan_merge_inouts
-----------------

This optimization attempts to merge a scan op's identical outer inputs as well
as merge its identical outer outputs (outputs that perform the same
computation on the same inputs). This can reduce the amount of computation as
well as result in a simpler graph for both the inner function and the outer
function.


Helper classes and functions
============================

Because of the complexity involved in dealing with Scan, a large number of
helper classes and functions have been developped over time to implement
operations commonly needed when dealing with the scan op. The scan op
itself defines a large number of them and others can be found in the file
``scan_utils.py``. This sections aims to point out the most useful ones sorted
by usage.


Accessing/manipulating Scan's inputs and outputs by type
--------------------------------------------------------

Declared in ``scan_utils.py``, the class ``scan_args`` handles the parsing
of the inputs and outputs (both inner and outer) to a format that is easier to
analyse and manipulate. Without this class, analysing Scan's inputs and
outputs often required convoluted logic which make for code that is hard to
read and to maintain. Because of this, you should favor using ``scan_args`` when
it is practical and appropriate to do so.

The scan op also defines a few helper functions for this purpose, such as
``inner_nitsot_outs()`` or ``mitmot_out_taps()``, but they are often poorly
documented and easy to misuse. These should be used with great care.


Navigating between outer inputs/outputs and inner inputs/outputs
----------------------------------------------------------------

Navigation between these four sets of variables can be done in two ways,
depending on the type of navigation that is required.

If the goal is to navigate between variables that are associated with the same
states (ex : going from an outer sequence input to the corresponding inner
sequence input, going from an inner output associated with a recurrent state
to the inner input(s) associated with that same recurrent state, etc.), then
the ``var_mappings`` attribute of the scan op can be used.

This attribute is a dictionnary with 12 {key/value} pairs. The keys are listed
below :

*   "outer_inp_from_outer_out"
*   "inner_inp_from_outer_out"
*   "inner_out_from_outer_out"
*   "inner_inp_from_outer_inp"
*   "inner_out_from_outer_inp"
*   "outer_out_from_outer_inp"
*   "outer_inp_from_inner_inp"
*   "inner_out_from_inner_inp"
*   "outer_out_from_inner_inp"
*   "outer_inp_from_inner_out"
*   "inner_inp_from_inner_out"
*   "outer_out_from_inner_out"

Every corresponding value is a dictionary detailing a mapping from one set of
variables to another. For each of those dictionaries the keys are indices of
variables in one set and the values are the indices of the corresponding
variables in another set. For mappings to outer variables, the values are
individual indices or -1 if there is not corresponding outer variable.
For mappings to inner variables, the values are list of indices because
multiple inner variables may be associated with the same state.

If the goal is to navigate between variables that are *connected* (meaning
that one of them is used to compute the other), the methods
``connection_pattern()`` and ``inner_connection_pattern()`` can be used.
The method ``connection_pattern()`` returns a list of lists detailing, for every
pair of outer input and outer output whether they are connected or not. The
method ``inner_connection_pattern()`` accomplishes the same goal but for every
possible pair of inner output and inner input.
